Overview:

The quicklime digester produced by Linqu Samsung Electronics Co., Ltd. is suitable for the digestion of quicklime in the sintering batching process to produce slaked lime. Because slaked lime has a large specific surface area, it can improve the generation rate and stability of mixed pellets. This series of digesters are divided into two series, single-shaft and double-shaft, with a variety of models. They are based on the experience of many iron and steel plants at home and abroad in the use of quicklime distributors, and are successfully developed on the basis of traditional digesters and humidifiers. -Distribution and elimination system for quicklime. It is widely used in metallurgy, chemical industry, power plant, boiler and other industries.

Equipment composition:

A typical system is mainly composed of a box body, a transmission mechanism, a stirring machine and a water adding device. The box body is provided with an inlet and an outlet. The mixer is rotatably installed in the box through the bearing seat and is connected with the transmission mechanism. It rotates under the drive of the mechanism; one end of the water adding device extends into the box, and the other end is connected to a water source, and the amount of water needed for digestion is adjusted according to the weight of the material to be mixed.


Performance characteristics:

It has high-efficiency mixing ability, dual-axis counter-rotating, strong mixing force, fully mixing water and quicklime; the blades of the dual-axis can clean each other, crush and agglomerate, ensure smooth discharge, and make white ash and water (or pollute) Water) can be mixed more effectively.
With a unique leak-proof design, the bearing parts of traditional digesters are easy to enter the lime water, and it is difficult to ensure the reliability of the bearings. This series of quicklime digesters adopt a separate design of the bearing seat and a unique sealing method at the simplified part.
It has the function of preventing steam. Because the front section of the quicklime digester adopts a sealed form with spiral blades and a circular shell, the steam and dust generated during the quicklime digestion process will not be emitted from the inlet, avoiding steam from the inlet When the upper level metering equipment becomes water and mud which affects the metering accuracy, a large amount of steam generated during the digestion process of quicklime can be discharged outdoors through the exhaust pipe to ensure the safety of the working environment and operation. The structure is compact. Due to the unique mixing method, its length is shorter than the traditional digester, saving space.

The main technical parameters: