PRODUCTS CENTER
PRODUCTS CENTER
Number of views:
1000

Broken arch hopper

Through the vibration of the two vibrating plates installed vertically inside, the silo is prevented from arching. It has the characteristics of large amplitude and strong vibration force. It is an ideal equipment for large silo arch breaking.
Retail price
0.0
元
Market price
0.0
元
Number of views:
1000
Product serial number
Category
破拱料斗
Quantity
-
+
Stock:
0
  • We only make higher-end measurement equipment! Focus on quality, guarantee service, and focus on automatic measurement is our consistent purpose. Welcome every customer to visit the factory.
  • Address: West of Xin'an Road North Section, Anqiu Economic Development Zone, Weifang, Shandong
  • Hotline：400-0536-023
  • Tel：+86-139-0536-2323（General Manager Sun）
  • Mail：lqsanxingdianzi@163.com
    • 1
    Product description

    Overview

    Through the vibration of the two vibrating plates installed vertically inside, the silo is prevented from arching. It has the characteristics of large amplitude and strong vibration force. It is an ideal equipment for large silo arch breaking.


    The main technical parameters of the equipment

    parameter

    Rated exciting force (KN)

    Rated speed (rpm)

    Rated current (A)

    Motor power (KW)

    PG-P300

    3

    2850

    0.78

    2X0.25

    PG-P400

    5

    2850

    1.1

    2X0.37

    Introduction to the main components of the equipment
    The arch-breaking hopper is mainly composed of a hopper, an upper and lower vibration plate, a spring sheet, a connecting rod, and a vibration motor.
    1. The hopper is the main component mechanism of the equipment. It is composed of a cone and upper and lower flanges. The upper flange is a round flange and is connected to the warehouse body. The lower flange is a method flange and is connected to the spiral gate.
    2. The upper and lower vibration plates are composed of spring steel, and the vibration of the upper and lower vibration plates can loosen the material and prevent the material from arching.
    3. The connecting rod is between the hopper and the upper and lower vibration plates, and is the supporting part of the upper and lower vibration plates.
    4. The spring plate is the power transmission part between the hopper and the upper and lower vibration plates.
    5. The vibration motor is the power source of the broken arch hopper, and the vibration of the vibration motor is transmitted to the upper and lower vibration plates through the spring sheet.


    working principle
    The working principle of the arch-breaking hopper: mainly relying on the elasticity of the spring sheet to transmit the vibration generated by the vibration motor to the upper and lower vibration plates, and the purpose of arch breaking is achieved by the vibration of the upper and lower vibration plates.

    Previous
    None
    Next
    None

    Messages

    Username used for comment:
    客户留言
    Description:
    验证码

    Copyright by：Linqu Sanxing Electronics Co., Ltd.鲁ICP备17021634号-2Poweredby300.cn